M3 V8 Carbon CCC Trim in the making

[Mark CSL]

This was a part i am making for a m8 with a M3 V8
Sand the part then cut the carbon
then resin the part and lat the carbon on the parts and into the vacume bag for 8 hours

[Mark CSL]

Day 2 sanded down and more resin applied

[Mark CSL]

part 3
sand some more to get a nice flat surface then more resin :whistle:

[Mark CSL]

Part 4
More sanding :whistle:
Then 3 coats of clear applied to give it that deep wet look :thumbs:
I will post some pix tomorrow of the part put back together :smokin:

[DazBlackCSL]

Marky those bits and all your carbon stuff looks mint ..

Need to get moving on some rear C63 AMG Diffusers !!

[AlexGTT]

Very nice work Mark.

However, you should know better than to use deep and wet to describe anything on here! ;)

[alexk]

Very nice Mark !

[Mark CSL]

Marky those bits and all your carbon stuff looks mint ..

Need to get moving on some rear C63 AMG Diffusers !!
do you have the part daz ? picture

Very nice work Mark.

However, you should know better than to use deep and wet to describe anything on here! ;)
:hahaha::hahaha: yes i normaly keep that for the mens room :whistle:

Very nice Mark !
Thanks Alex

[DazBlackCSL]

do you have the part daz ? picture




Part is on the car, well the std part anyway !

[Mark CSL]

Is the middle picture the original part ?
if so i could do it :thumbs:

[Mark CSL]

Daz you would be cheaper buying this
http://www.ebay.co.uk/itm/Carbon-Fiber-Rear-Bumper-Big-Fin-Diffuser-Spoiler-Fit-For-Benz-W204-C63-AMG-12UP-/251655612788?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a97d7e974

The work and the carbon will cost more :whistle:

[DazBlackCSL]

Is the middle picture the original part ?
if so i could do it :thumbs:

Yep that's the bit !

[DazBlackCSL]

Daz you would be cheaper buying this
http://www.ebay.co.uk/itm/Carbon-Fiber-Rear-Bumper-Big-Fin-Diffuser-Spoiler-Fit-For-Benz-W204-C63-AMG-12UP-/251655612788?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a97d7e974

The work and the carbon will cost more :whistle:

Yeah got my eye on a couple that have been recommended to me, though not knowing what your handy work would come in at of course !

Gonna be the new year anyway before I can start spending on bits and bobs !! :thumbs:

[Mark CSL]

It would be around £400 in time and materials daz
the japs are cheap