exhaust clamps

[Jon8710]

hello gents

the old exhaust clamps from the center section to the rear box have cracked and fallen off, do you remember where the retro fit clamps can be picked up and how hard it is to do ?

cheers

[cslsuperfan]

hello gents

the old exhaust clamps from the center section to the rear box have cracked and fallen off, do you remember where the retro fit clamps can be picked up and how hard it is to do ?

cheers

James (monkey) is/was a senior tech at Munich legends and can supply the repair clamps for the mid section/back box. Top quality replacement.

[Bounce]

Replaced one of mine last week,these are the ones you need ;)

[Bounce]

Not cheap i know,but you do get all four clamps (8 pieces )and they are very well made :thumbs:

[shimmy]

Brett

so that is both pipes all pieces??

[Trawler]

Bartlett changed mine. They have some ss items.

[Bounce]

Brett

so that is both pipes all pieces??Yes mate,4 clamps which come apart.I had to get my own new bolts though.;)http://www.ebay.co.uk/itm/BMW-E46-M3-Z4M-Exhaust-Flange-Repair-/111453123138?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19f31fb242

[Bounce]

Bartlett changed mine. They have some ss items.These are Also stainless steel 😉

[shimmy]

Yes mate,4 clamps which come apart.I had to get my own new bolts though.;)http://www.ebay.co.uk/itm/BMW-E46-M3-Z4M-Exhaust-Flange-Repair-/111453123138?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19f31fb242

what about the gaskets>?

[Bounce]

what about the gaskets>?ordered 2 new ones from BMW and 4 new nuts and bolts ;)

[Bounce]

Here is a pic of 2 of the clamps with new gaskets and bolts

[Jon8710]

thats spot on cheers bounce i have got them on order now,

Are they hard to fit and is it a must to get new gaskets ?

[CraigMillwardCroft]

thats spot on cheers bounce i have got them on order now,

Are they hard to fit and is it a must to get new gaskets ?

If your changing the brackets why would you not replace the gaskets:whistle: and Bounce did his :thumbs:

[Bounce]

thats spot on cheers bounce i have got them on order now,

Are they hard to fit and is it a must to get new gaskets ?Not hard to fit mate,just jack the car up and take the passenger rear wheel off,and there it's looking at you,you may have to give the old ones a little tap with a hammer to get them off(Depends how rusty they are ) I don't think new gaskets are a must,but do it any way.If I can do it anyone can,except Shimmy.:hahaha:

[shimmy]

Not hard to fit mate,just jack the car up and take the passenger rear wheel off,and there it's looking at you,you may have to give the old ones a little tap with a hammer to get them off(Depends how rusty they are ) I don't think new gaskets are a must,but do it any way.If I can do it anyone can,except Shimmy.:hahaha:

well tbh mine is sitting in the shed still attached tom the backbox and i still can do it.:)

gonna buy some and get old ones off and get back box and oem mid section all smartened up