PDA

View Full Version : OEM dampers refurb?

shimmy
20-04-2014, 10:08 PM
Can you get them refurbed if they are leaking?
NZ_M3
23-04-2014, 01:22 AM
Unlikely ... but why would you when a new set doesn't actually break the bank??
shimmy
23-04-2014, 01:53 AM
Unlikely ... but why would you when a new set doesn't actually break the bank??

never even looked at price of new ones.....how much are they?
karbonkid
23-04-2014, 07:05 AM
never even looked at price of new ones.....how much are they?

BMW Main Dealer prices:
Fronts - £269.33 each
Rears - £171 each
shimmy
23-04-2014, 08:54 AM
BMW Main Dealer prices:
Fronts - £269.33 each
Rears - £171 each

So with vat, a bag of sand!


How much to refurb :)
karbonkid
23-04-2014, 09:03 AM
So with vat, a bag of sand!

How much to refurb :)

That's inc VAT & before any discounts.
shimmy
23-04-2014, 09:12 AM
That's inc VAT & before any discounts.

So £880 - 10% = say £800 notes.

Ta Alex.
s.mac
23-04-2014, 07:37 PM
£740 last time I priced up, no springs with that
shimmy
23-04-2014, 07:38 PM
£740 last time I priced up, no springs with that

ta

also I guess my existing may be ok at front (back are leaking)
s.mac
23-04-2014, 07:44 PM
I can't remember price split up, I see if I have it somewhere
northernjim
23-04-2014, 07:58 PM
ta

also I guess my existing may be ok at front (back are leaking)





Do you sit in the back?










.
shimmy
23-04-2014, 09:41 PM
Do you sit in the back?

.

Iirc only when you pop round for a bite :beer: :gayfight:
J2LTB
27-04-2014, 11:39 PM
I spotted these. Not sure if they are correct though ???

BMW E46 M3 3.2 CSL FRONT + REAR SHOCK ABSORBER STRUTS SHOCKERS SACHS GERMANY OEM

http://bit.ly/MTrVzS
Monkey
28-04-2014, 10:01 PM
I spotted these. Not sure if they are correct though ???

BMW E46 M3 3.2 CSL FRONT + REAR SHOCK ABSORBER STRUTS SHOCKERS SACHS GERMANY OEM

http://bit.ly/MTrVzS

ETK shows different numbers for standard M3 & M3 CSL. Would want to cross refer the Sachs numbers.
shimmy
28-04-2014, 10:39 PM
I emailed them but no reply yet.
J2LTB
28-04-2014, 11:31 PM
Always worth a punt :thumbs:
mattCSLnut
29-04-2014, 08:02 PM
ETK shows different numbers for standard M3 & M3 CSL. Would want to cross refer the Sachs numbers.
Whilst I agree, they do have different part numbers I also wonder how much actual difference (if any) there is between the two.
Is this the repeat of... standards M3 200 Cell verses M3 CSL 200 Cell cats with only difference being the part number ? :whistle:
s1csl
30-04-2014, 08:57 PM
Whilst I agree, they do have different part numbers I also wonder how much actual difference (if any) there is between the two.
Is this the repeat of... standards M3 200 Cell verses M3 CSL 200 Cell cats with only difference being the part number ? :whistle:

They have a different part number as you know, would not know about the shocks but the springs are 1 coil less on the front + the rear springs are smaller on a CSL than a standard M3, I am sure somebody will be along to tell us Matt
mattCSLnut
30-04-2014, 09:51 PM
They have a different part number as you know, would not know about the shocks but the springs are 1 coil less on the front + the rear springs are smaller on a CSL than a standard M3, I am sure somebody will be along to tell us Matt
I'm not holding my breath on this one ;) If it helps here's a pic of my old OEM rear CSL shock showing part number.