AP racing set up

[sjb]

Anyone got anything or know of any second hand 6&4 pot AP racing kits/part kits going? condition not important I would paint them up.
Cheers, Shawn.

SORTED

[shane@mbtech]

Anyone got anything or know of any second hand 6&4 pot AP racing kits/part kits going? condition not important I would paint them up.
Cheers, Shawn.

I might have a K sport kit going.
Near new AP discs
Near new RS29 pads

[sjb]

I might have a K sport kit going.
Near new AP discs
Near new RS29 pads

Thanks but I have my heart set on AP cheers.

[shane@mbtech]

Thanks but I have my heart set on AP cheers.

Buy new then. Speak to TrackM3

[sjb]

Have done cheers, still would consider a used set up, I've recently refurbed 8 brembo calipers so don't mind a bit of a tinker :-D

[shimmy]

Have done cheers, still would consider a used set up, I've recently refurbed 8 brembo calipers so don't mind a bit of a tinker :-D

I've got a set at Simpsons but not sure I want to part........I'm hoarding

[CraigMillwardCroft]

Anyone got anything or know of any second hand 6&4 pot AP racing kits/part kits going? condition not important I would paint them up.
Cheers, Shawn.

Try Questmead they did me a good deal, but ask for the DS2500 to be removed and get Pagid pads instead :-D

[sjb]

I've got a set at Simpsons but not sure I want to part........I'm hoarding

Well let me know if you change your mind ;)

Try Questmead they did me a good deal, but ask for the DS2500 to be removed and get Pagid pads instead :-D

Cheers, just looked and they are trade only??

I've got a price from Trackm3 already and balance motorsport who are 10mins from me, just need to compare prices and what the kits include. I'm definitely not fussed about a used set though and spending a bit of time tarting them up...

[Neil M]

Well let me know if you change your mind ;)
Cheers, just looked and they are trade only??

Ignore that, the will deal direct if you speak to them on the phone and mention the 'Register' :whistle:

[shimmy]

Well let me know if you change your mind ;)



Cheers, just looked and they are trade only??

I've got a price from Trackm3 already and balance motorsport who are 10mins from me, just need to compare prices and what the kits include. I'm definitely not fussed about a used set though and spending a bit of time tarting them up...

I also have some used front discs and bells......spare.

Good thing about refurbish a set is you can choose your own colour

[sjb]

I also have some used front discs and bells......spare.

Good thing about refurbish a set is you can choose your own colour

Feels like you are teasing me :gayfight:;)

[shimmy]

Feels like you are teasing me :gayfight:;)

Sort of

They will be for sale but I was contemplating refurbish and taking mine off, then selling mine either refurbed or not.

Now not so sure, just need to get them back from Simpsons first.

[trackm3]

Try Questmead they did me a good deal, but ask for the DS2500 to be removed and get Pagid pads instead :-D

Just for a heads up, questmead wont do pad swaps anymore, I think they became over run with 2500's from these kits :-D

[sjb]

Thanks for the replies, I'm going to start a sort of 'rate my brakes' thread later as my head is full of weights, bias and total piston area confusion. I've weighed lots of OE CSL, Brembo 4 pot, Porsche GT3 6 pot & AP 6 pot calipers and discs and the weight differences is nothing short of unbelievable, especially compared to the OE CSL boat anchors :hahaha:

[sjb]

Thanks for the replies, I'm going to start a sort of 'rate my brakes' thread later as my head is full of weights, bias and total piston area confusion. I've weighed lots of OE CSL, Brembo 4 pot, Porsche GT3 6 pot & AP 6 pot calipers and discs and the weight differences is nothing short of unbelievable, especially compared to the OE CSL boat anchors :hahaha:

Actually I can't be bothered to, most of my brembo kit is sold so now have the cash for some AP stuff :thumbs:

[J2LTB]

i think i saw a AP add on di di di dah M3Cutters shhhhhhh

[devam]

brake duct blanking plates are these in the csl? Can anyone help me I am new to this and i have standard brakes. I am considering upgrade. I know nothing of brakes.

1: Ap racing is that calipers and rotors and is that the best brand? alcon, brembo?
2: is it only a certain model for our car? 6 pot rear 4 front?
3. does that solve cooling issue?
4. Is there different brake fluid needed?
5. does the csl have those duct blankes?
6. cost?
7. downsides?
8. what are the weight savings?
9. sorry for all the questions
10. are there any lightweight rotors? Are they the heavy bit? Is that what carbon ceramic is? do you need grooved and not drilled and why?
11. It looks like you could put another inch or 2 bigger rotor in the wheel space is that the case?

Thanks

[sjb]

i think i saw a AP add on di di di dah M3Cutters shhhhhhh

Couldn't find it, maybe it was my wanted ad??

brake duct blanking plates are these in the csl? Can anyone help me I am new to this and i have standard brakes. I am considering upgrade. I know nothing of brakes.

1: Ap racing is that calipers and rotors and is that the best brand? alcon, brembo?
2: is it only a certain model for our car? 6 pot rear 4 front?
3. does that solve cooling issue?
4. Is there different brake fluid needed?
5. does the csl have those duct blankes?
6. cost?
7. downsides?
8. what are the weight savings?
9. sorry for all the questions
10. are there any lightweight rotors? Are they the heavy bit? Is that what carbon ceramic is? do you need grooved and not drilled and why?
11. It looks like you could put another inch or 2 bigger rotor in the wheel space is that the case?

Thanks

A lot of Q's there! maybe start another thread asking?


Anyway I am now SORTED :thumbs:

[alpaneras]

Anyone got anything or know of any second hand 6&4 pot AP racing kits/part kits going? condition not important I would paint them up.
Cheers, Shawn.

SORTED

I have exactly what you are looking for. If you are still interested pm me.