BBS CH Motorsport Alloys With Cups

[RobSadler]

Due to unforeseen Marital issues, I am sadly having to sell up and first on the list is my set of Wheels & Tyres for Track Use.

BBS CH Motorsport Alloy Wheels In Silver

Front - 19" X 8.5" ET 35
Rear - 19" X 10" ET 20

All 4 come with Michelin Pilot Sport Cups

NSF - 2mm
OSF - 3.5-4mm
NSR - 4mm
OSR - 4mm

They are as new and still very shiny. There is a slight rash mark on the outer rim over about 10cm on the N/S/R, however easily and quickly put right by an AWR man.Thats just me being very picky!

Due to the value and weight of these I will need them collected from either North Essex or South Cambs.

£1500 ovno

Please PM me if you are interested with your contact details. I will email photos over if required.

[E46CSL]

Sounds like a good deal.

[RobSadler]

Sounds like a good deal.

It is, Im like a modern day Mary Poppins :-)

I have responded to your PM.

regards,

Rob

[Neil M]

Sorry to hear about the circumstances Rob, but that's a give-away price - the wheels alone cost more than that!

[RobSadler]

Sorry to hear about the circumstances Rob, but that's a give-away price - the wheels alone cost more than that!

I Know.... Someone is getting a good deal !

[shimmy]

Sorry to hear about the circumstances Rob, but that's a give-away price - the wheels alone cost more than that!


ill give him £1200 :thumbs:

[Equinox]

Any pictures ??

[RobSadler]

Any pictures ??

PM me your email address and I will send some over to you.

Regards,

Rob

[RobSadler]

Any pictures ??

http://www.cslregister.com/forum/picture.php?albumid=295&pictureid=2685

http://www.cslregister.com/forum/picture.php?albumid=295&pictureid=2684

http://www.cslregister.com/forum/picture.php?albumid=295&pictureid=2683

http://www.cslregister.com/forum/picture.php?albumid=295&pictureid=2682

[Steve B]

Must resist.....

[CraigMillwardCroft]

Very nice but want 18" next time round :thumbs:

[race.it]

Somebody on cutters is after a set.

[Neil M]

These are offered at 'Register' price, 'Cutters' + £500 :hahaha:

[race.it]

Lol, plus tyre tax also I presume ;)

[Graham]

Cutters are a nightmare to sell stuff on. Had a nightmare with CSL wheels recently.

[RobSadler]

For those who have asked, I am not selling just the wheels or tyres. I don't have the time or transportation to do this. They are only available as a wheel and tyre package. Thanks!:smt055

[Equinox]

I keep looking at these waiting to see either a lower price or a sold post.... not sure which i'd prefer.

[RobSadler]

I keep looking at these waiting to see either a lower price or a sold post.... not sure which i'd prefer.

I am in no rush... I think they are priced sensibly, considering, as others have mentioned, the wheels alone cost more. They are like new, have been used a couple of times and as the buyer of my car will testify,I look after my stuff :thumbs: If you want them, buy them... dont torture yourself:)

[zipzam]

Very nice, wish I had the cash!

[excursion]

Cutters are a nightmare to sell stuff on. Had a nightmare with CSL wheels recently.

As did I with CSL exhaust bits. I ended the ad in the end as I don't have time to waste on the nonsense.

[RobSadler]

As did I with CSL exhaust bits. I ended the ad in the end as I don't have time to waste on the nonsense.

Yes, plenty of people from cutters/pistonheads interested, however they all seem to think that I am going to sell them for £4.50 and I should be grateful. As I have previously mentioned, I am in no rush and they are priced very well. I would have thought that a CSL register member would have snapped these up by now at this price ? I may end up keeping them and having to buy another CSL to stick them on :beer:

[Neil M]

Give 'Sailorbaz' a gentle nudge, if you're in no rush!
I paid 1.2K in April for a Black set without the rubber, ready for the trip. Needless to say they didn't get much use!

[CraigMillwardCroft]

Give 'Sailorbaz' a gentle nudge, if you're in no rush!
I paid 1.2K in April for a Black set without the rubber, ready for the trip. Needless to say they didn't get much use!
Can we see a picture of your car with them on :thumbs:

[Neil M]

Can we see a picture of your car with them on :thumbs:
Just for you Craig: http://www.cslregister.com/forum/album.php?albumid=232&pictureid=2724 :-D

[RobSadler]

Just for you Craig: http://www.cslregister.com/forum/album.php?albumid=232&pictureid=2724 :-D

They look great in Black.... what width are the fronts ?

[RobSadler]

Due to unforeseen Marital issues, I am sadly having to sell up and first on the list is my set of Wheels & Tyres for Track Use.

BBS CH Motorsport Alloy Wheels In Silver

Front - 19" X 8.5" ET 35
Rear - 19" X 10" ET 20

All 4 come with Michelin Pilot Sport Cups

NSF - 2mm
OSF - 3.5-4mm
NSR - 4mm
OSR - 4mm

They are as new and still very shiny. There is a slight rash mark on the outer rim over about 10cm on the N/S/R, however easily and quickly put right by an AWR man.Thats just me being very picky!

Due to the value and weight of these I will need them collected from either North Essex or South Cambs.

£1500 ovno

Please PM me if you are interested with your contact details. I will email photos over if required.

Bump- Now With Mince Pie:beer:

[Neil M]

They look great in Black.... what width are the fronts ?

They are the same sizes as yours Rob.
I'm surprised to see you still have the CH's, I thought they would have been snapped up by now, especially with the cups ready fitted and virtually for free! :thumbs:

[RobSadler]

They are the same sizes as yours Rob.
I'm surprised to see you still have the CH's, I thought they would have been snapped up by now, especially with the cups ready fitted and virtually for free! :thumbs:

They are a bargain Neil. The problem is now i keep looking at CSLs for sale again ( Must Resist ) :) my original EJ53VSL is up at Nick Johnsons currently. It's tugging at the heart strings.

[RobSadler]

Now Sold:)